The biggest aluminum profile manufacture in the middle of china,mainly produce the 6000 grade aluminum for door and windows.have 23 sets extrusion.mill finish,powder coated,anodized,wooden graining surface treatment can all be available.cutting,drilling,machining can all be done.export many country in the worldwide.
Aluminum composite panels.Aluminum composite panels
Solar water heater, solar panel, solar pv .
Aluminum composite panel.Transportation, shipping
Aluminum flat rolled products, Building sheets Closure stock, Fin stock, Hot rolled plates, Pattern sheets, Cable wrap stock, Cold rolled coils, Flooring sheets/tread plates, Lamp cap stock, PCB entry sheets/coils, Circles, Cold rolled sheets, Foil stock, Litho stock, Spiral fin stock .
stainless steel honeycomb panel is fabricated through special processing technology, the back skin is high-strength aluminum alloy, and core material is aluminum honeycomb core treated by anti-corrosion treatment, and is compounded by special adhesive at high temperature and high pressure. Stainless steel honeycomb panel not only retains the gorgeous decorative texture of stainless steel, but also combines the advantages of high flatness and installation strength of honeycomb panel, which can meet the needs of building exterior wall, interior wall and ceiling decoration.
Tarpaulin, tarp, pe tarp, frp, grp, grating, pultruded, composite, frp rebar, panel tanks, pond liner, geomembrane, junction box, truck cover, boat cover, tent, camping.
Aluminum honeycomb panel can be used for partition, wall.
Custom-made, any size and profile, any surface treatment.
Punch hole, any surface treatment, rockwool between aluminum sheet.
EPM A2, B1 & Non-FR. At EPM's purpose-built high speed production line using the most advanced technology in the industry and covering an area of more than 50,000 square meters, our multi-million dollar state-of-the-art facility has an annual capacity to produce in excess of 60 million square meters(600 Million Square Feet) of Aluminium Composite Panels using the very best raw materials from internationally renowned suppliers. EPM A2 ACP EPM's A2 Fire-Retardant ACP core consists of well-balanced combination of combustible (LDPE) and non-combustible (Mg (OH)2) in the core, will prove resistance to fire thereby delaying combustion, and declining further spread. Where an A2 SCP core should be 90% of non-combustible proportion with 10% balanced mix of LDPE and other supplements. EPM FR-B1 ACP EPM's FR-B1 is composed of a modified mineral-based core which consists of non-combustible mineral (Magnesium Hydroxide) and small quantity of low-density polyethylene with a composition of 73% of mineral plus 25% of LDPE and 2% of other additives sandwiched in two aluminum skins. EPM NON-FR ACP EPM's Non-Fire Retardant ACP core is made up of 100% LDPE, Low-density polyethylene (Linear or Recycled) which is a plastic based core, a petroleum by-product and of course 100% combustible and contribute to increase the intensity of fire propagation when they burn and changes a small fire to a big disaster. EPM ACP SPECIFICATIONS Panel Measurements Length 2440mm, 3200mm, 3600mm, up to 6000mm Panel Thickness 3mm, 4mm, 5mm, 6mm Aluminum Skin Thickness 5mm, 0.4mm, 0.3mm Weight 3mm=4.5kg/m2: 4mm=5.5kg/m2 6mm=7.3kg/m2 (Polyethylene Core) 3mm=5.8kg/m2: 4mm=7.6kg/m2 6mm=10kg/m2 (Modified Mineral Core)
We are the leading manufacturers of Aluminum Profile. The only reason we make a greenhouse structure is to cover it. We need to make sure to use the profile that does not damage the plastic and also does not allow the spring to jump out of profile. Choice of right alloys is very important when it comes to material for locking profiles. Additional Information: Total running meter per bundle is 384 running meter Cut Length per piece 4 meters Standard Packing in 96 pics in a bundle
Description: Product: aluminum profile Model Number: 6082 1.extruded heatsink 2.OEM is welcomed 3.ISO9001:2008,CE 4.all kinds of surface treatment 5.best price and delivery on time
Aluminium profiles in mill finiish, fabricated , powder coated or anodized form. Ranging from CCD of 5" to 12" in various geometrical shapes and customised design for varied applications like Industrial, Electrical, Automotive, Defence, Aerospace, Aviation, Consumer Durables and other transport applications. Whole range of grades like 6063, 6061, 6351, 6082, 2014, 2017 can be supplied.
structure, Winsom cassette honeycomb panel is made of aluminum outer & inner skins and expanded honeycomb core which are composited under high temperature high press. It features light weight, high strength, good rigidity, high corrosion resistance and stable performance. Since the air layer between outer and inner skins is divided into numerous closed holes by honeycomb, the transmission of heat and sound wave is greatly limited. Thus, compare with other wall cladding materials, aluminum honeycomb panel has better heat preservation and heat insulation performance. Due to the entire component is recycle, as the green environmental protection product, honeycomb panel is the direction of development of new building materials in the future.
Red Color Thermoplastic impression material in the form of round plates cakes to take primary impression in edentulous cases. INDICATIONS Correction models Raising the edges of the impression For primary impression in edentulous cases before preparing special tray
Red Color Thermoplastic impression material in the form of round plates cakes to take primary impression in edentulous cases. INDICATIONS Correction models Raising the edges of the impression For primary impression in edentulous cases before preparing special tray
Red Color Thermoplastic impression material in the form of round plates cakes to take primary impression in edentulous cases. INDICATIONS Correction models Raising the edges of the impression For primary impression in edentulous cases before preparing special tray
A3003 aluminum honeycomb core Cell thickness available: 0.038-0.076mm Side length: 3,4,5,6,7.5,8,10,12,15mm Expansion size: as per customized Supply form: slices, block Linyi Golden Promise Decoration Materials Co., Ltd. has been devoted to the production and supply of aluminum honeycomb core and aluminum honeycomb panels for years. Please feel free to contact Ivy for more details.
DECOPANEL decorative insulation panels : is a new type of product for interior and exterior decoration, beyond it is appearance it solves problems about insulations : heat, fire and sound. This new sandwich panel has three layers ; coated aluminium or steel alloy sheet layer with nano protective layer outside, PU polyurethane foaming middle layer and aluminium foil layer. The production can be made in a large variety of surface textures even with wooden, marble, wallpaper appearance. Can be produced in requested lengths up to 6 meters. Panels with 10 mm thickness can be used for internal or external, 30 mm thickness can be used for external applications. Our production line has 4 different section types of panel s. It has so many advantages when compared to traditional wall covering materials. 1. THERMAL INSULATION â?¢ When applied at wall&ceilings it provides a temperature difference of 7 degrees. It prevents the increase of indoor temperature at hot seasons, likewise it prevents the heat loss in cold seasons. Therefore decopanel provides a comfortable living area in all cond 2. SOUND INSULATION It provides 29 DB de So it should be applied in places where soun itions. crease in nc d insulation ise when applied to walls. s crucial like hospitals, hotels, labaratories,schools, assembly rooms, office buildings. 3. EIREPREVENTIONâ?¢ This product has passed the fireproof grade B1, so basically meets the engineering requirements of fire. 4 HARDNESS.L The production combines the aluminium or galvanized steel alloy plate and polyurethane which makes a substantial increase in strength and hardness. So can be applied to all kinds of wall and ceilings. 5. MOISTURE PROOF â?¢ It prevents the temperature differences at walls&ceilings so wetness and moisture does not occurs. 6. GREEN ENVIRONMENTALPR_OTECTION â?¢ All raw materials adopted by the product is environmental protection material, zero emission, zeroformaldehyde, zero toxic gas oscillation. 7. INSTALLATION CONVENIENCF ft I IGHTNESS_â?¢ It can be applied on existing wall&ceiling but also it can be used in partition wall and suspended ceiling applications. So it is much more labor-saving and time-saving product from traditional old wall&ceiling covering materials. 8. LIGHTNESS.: It is a light material so when used to produce partition walls and suspended ceilings. It does not increase the total weight of the building also does not increase earthquake load. 9. SURFACE_DURABILITY â?¢ The surface of product can not be deformed, damaged and can be cleaned easily. 10. SAVE SPACE : It does not installed by any chassis, it can be directly mounted on the wall using screws or punches. This provides 5-10 cm saving of wall space. THICKHNES: 1 mm WIDTH: 4 mm We can be produced in any length up to 6 meters